How to Clean a Vacuum Hose (Step by Step Guide)

This blog is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no cost to you.

Most of us enjoy using a vacuum cleaner but cleaning its hose sometimes may become a headache. I thought you should know how to clean a vacuum hose right at home; cleaning the hose improves the tool’s performance and extends its lifespan.

A vacuum hose features various parts, and you must wash all of them separately.

A hose will enable you to clean intricate areas where a vacuum fails to reach. More so, its flexible design prevents the hose from susceptible to clogging. You will have a hard time using a clogged hose; vacuum cleaners depend on air movement.

Therefore, this article should guide you to carry your vacuum’s internal and exterior parts’ thorough cleanliness.

Step by Steps Guide to Clean a Vacuum Hose

Step1: Detaching the hose from the vacuum

Before you start the cleaning process, the first thing to do is detach the hose from its usual location.

Doing this may vary based on the type of model you are using. It usually involves pressing the release button or twisting the hose for a standard vacuum cleaner.

You need to avoid using too much force when detaching; you may break or interfere with its functioning.

Detaching the hose from the vacuum

However, these hosen don’t need excessive force because of their easy-to-remove design; unless you have no idea how to detach it.

If you are not confident about disconnecting the hose, revise the user manual, this is an expensive machine. Please don’t play with it.

Furthermore, before detaching the hose remember to power off and disconnect the tool from a power source.

Doing so will prevent you from unnecessary shocks, or you may accidentally switch on the device while trying to remove the hose.

Step 2: Removing and unclogging clumps

After detaching the hose is successful, you have it at hand; it is not time to clear out all dirt and debris that you can see. You will have to lay out the hose on a straight and flat surface under this step, i.e., a table or floor.

Use anything thin to move debris and dirt from the pipe. Example of the material to use includes; broom or mop handle.

Removing and unclogging vacuum hose clamps

The handles can do great for you by pushing out anything that might cause clogging that you barely reach.

Under this step, you need to be much keen because a vacuum hose is lightweight and flexible. Therefore, use less force so that you don’t create a hole in your stocking.

Step 3: Washing your hose

The only way to remove stubborn dirt from the hose’s interior folds is to clean them out.

Fill your sink with water not less than four inches and then add some two or one spoonful of the mild detergent or dish soap. Completely submerge the whole hole in the mixture.

Submerging the hose allows water to enter the item and cleanse it quickly. Furthermore, submerging enables you to clean the material more accessible than free cleaning.

Furthermore, you don’t have to leave the material’s external surface; therefore, use a damp cloth to do so. Take note not to use harmful chemicals; they may damage your hose.

Step 4: Sanitizing the vacuum hose

After you are through with the cleaning process, the next thing is to sanitize the hose. Here, sanitization prevents any bacteria or stubborn allergens from sticking to the material.

You may decide to wrap towel papers around the head of the broomstick or a duster; tape the paper towel to ensure that it doesn’t twist.

Furthermore, get a cup, fill it with lukewarm water, and add two teaspoonful of vinegar (white). You may dip the paper towels in this solution or apply it slightly.

sanitizing the vacuum hose

The next thing is to insert your broom or duster handle with paper towels at the end and use the mix at the hose’s interior surface.

This art will kill any bacteria or germs in the hose. White vinegar is not only useful in killing germs but also all unpleasant odors.  

Give the solution enough time to dry before rinsing your hose with running water under the tap.

Alternatively, you may use baking soda to sanitize the hose. For better results, you may combine the two ingredients to form one cleaning solution. They perform excellently.

Step 5: Using a cleaning bottle brush

This step is not necessary if your vacuum is not dirtier. Sometimes there might be stubborn grime that you barely reach, especially at the folds; it is difficult to clean such places without a cleaning bottle brush.

I recommend this type of brush because it has bristles suitable for scrubbing awkward and lingering dirt. The strands are long and thin to remove the stubborn grime excellently.

Step 6: Rinsing interior part of the hose

After you are through with scrubbing and cleaning your vacuum hose, the next step will be rinsing. Rinsing might be more comfortable with running tap water; it has high pressure for thorough rinsing. Give the water enough time to run in the material.

Running water can flush out all loose grime and dirt from the hose with a lot of ease. A useful trick while cleaning a vacuum hose is to hold it to form a U-shape.

Doing so will enable you to shake the hose before water exits. It is simple, just like that.

Step 7: Drying the hose

Now that you are through washing, sanitizing, and rinsing, the next thing will be to dry the material. Give it time to dry before installing it back to its place.

The best way to dry the hose is to hang it over a curtain rod in the shower room or any place that can prevent the hose from holding water.

To speed the drying process, you may shake it immediately after rinsing to drain out excess water. Don’t hurry to fix the hose back; give it some hours.

While the hose is drying, wipe the vacuum tool joints ready for the reinstallation of the hose.

When it is dry, fix it back and test to see if there is still an unpleasant odor or dust, there might be another issue with your machine. It would recommend you seek professional help.

Frequently Asked Questions

How often can I clean my vacuum hose?

Cleaning a vacuum hose is inevitable, and it is advisable to clean your hose once in a month or three weeks, depending on its situation.

What is the importance of cleaning a vacuum hose?

The only way to remove stubborn dirt from the hose’s interior folds is to clean them out. Cleaning a vacuum hose improves not only the performance of the tool but also extends its lifespan.

You will enjoy using a clean vacuum hose; air movement will be smooth.


Cleaning a vacuum hose is a must for the excellent performance of the cleaner. That is why I think it is good to develop a comprehensive guide on cleaning a vacuum hose.

It is advisable to clean your hose once in a month or three weeks, depending on its situation.

Proper cleaning of the hose will enhance smooth air movement for efficient vacuuming. There it is, at least now, you know.

Use simple cleaning solutions like white vinegar and baking soda. More so, use anything thin to remove blockages, i.e., a mop or broom handle.

Leave a Comment