How to Use a Carpet Cleaner (Step by Step)

This blog is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no cost to you.

Vacuuming the carpet is an ideal way of removing dirt and dust. But, most of the people find it hectic on how to use a carpet cleaner.

Not all the ground dirt in the carpet comes from your shoes; some are invisible dirt particles like pollen, skin cells, and some food particles which remain behind after vacuuming.

At times, cleaning of the carpet may seem to be hectic, but when it comes to carpet cleaners, it makes the work easy since they simple to use.

In this article, I am going to describe how you can use your carpet cleaner to ensure that you stay in a clean environment all through.

Step By Step Guide on How to Use a Carpet Cleaner

1. Plan your clean

using a quality cleaner for carpet

If you intend to carry out extensive cleanness on your carpet, it is good to plan on how you are going to do it. The carpet will remain wet for some times before you complete the task.

It may remain wet for about 5-6 hours if you are using a quality cleaner. It is advisable to allow your carpet to dry for the whole night.

One of the worst mistakes made when cleaning the carpet is leaving it wet for a long time. The cleaners work well in removing the dirt from the upper part of the carpet.

2. Move your furniture

Identify one of your rooms and move all the furniture there. Once you complete moving your furniture, you can start cleaning room by room.

However, if you are unable to vacate all your furniture, you can clean one section after the other until you finish all rooms.

3. Vacuum

At this point, you need to vacuum your carpet once you have cleared the space. You can repeat the cleaning twice you have to begin cleaning lengthwise all through your room.

vacuum for carpet cleaning

Once you complete, you can now repeat in the diagonal direction. Besides, ensure that you lift the carpet to ensure that you remove all the loose dirt and hair from below before wetting it thoroughly.

4. Take your time to read the manual

The next thing to do is now to read all the instructions on the manual book. If by any chance, you used the carpet cleaner before, the type and amount of the detergent you use may differ between the models and brands.

Therefore, it is good to follow the recommendations whenever you are filling water and detergent to your cleaner.

Do not add more and more cleaning fluid if the carpet is dirt since there will be more soap in the carpet that will not come out.

Besides, never add excess water to the tank as this may interfere with the workability of your machine. Sometimes, you should follow the manual instruction to check whether to use cold or warm water.

5. Water and detergent

At times, warm water usually works best. However, you should not use water that is too hot.

Some instructions on the manual guide may not allow you to use microwaved water or boiled water into the tank. This is because hot water may significantly damage your cleaner machine.

Avoid using your machine on non-color fast or jute, silk, or leather. Other carpet cleaner devices require an extra detergent for proper cleaning of the tank while other machines feature a separate compartment.

6. Pre-treatment

At this stage, you need to identify for soiled patches and pre-treat them immediately. Most of the carpet cleaners come with an attachment of hose that is very useful in cleaning the upholstery and stairs. Besides, you can use the hose attachment in removing stains and spills.

Therefore, before you start your general cleaning on the carpet, it is good to pre-treat the carpet 5 minutes earlier.

If there are dried stains that are too old, you can use some stains with separate remover. However, avoid making the patch too wet because it does not dry properly hence may end up moldy and stained.

7. Cleaning method

You can now take your cleaning machine on the far end from the door. This one may help in minimizing the time you take in the wet carpet.

The cleaner machine comes with different settings depending on the level of your soiling and type of the carpet you have.

Therefore, at times you may require using high settings some places on the floor, especially where people walk regularly, and also using lighter settings in some areas near the edge of your room.

cleaning machine for carpet

Begin from the corner of the room, cleaning in a straight line towards the other wall that is opposite. Once you complete this part, you can turn around and start cleaning in the opposite direction.

It is good to clean in stripes as if you are mowing. Avoid pushing the carpet cleaner in any direction; instead, get closer to it.

Ensure that there is a slight overlap of the strips to avoid missing any section of your room.

8. Maintain the rate of cleaning

Start at a slow rate when cleaning. The machine works by spraying your carpet with very clean water with soap as it sucks it back.

You should maintain a slow pace because when you move quickly, the cleaner may not get enough time to complete the entire process of cleaning.

It can either fail working or even leave some dirty water where you have already cleaned.

It is, therefore, advisable to move at a slower pace to ensure more in-depth cleaning. However, once you start working, avoid stopping abruptly.

If by any chance, you require a slight break, you can turn off your machine and start it immediately after a pause.

9. Change the water tank of your machine

Sometimes it is crucial to keep on checking on the water tank of your device. The machine will always signal you immediately when the dirt tank gets full.

You can stop working and empty the tank and refill it immediately with clean water. The number of times you empties your tank depends on the area you intend to clean.

You can empty the tank towards outside or even into the toilet. Avoid pouring water into the shower or sink since it may cause some clogging.

10. Rinse

Once you complete your task of cleaning, fill the water tank with some cold water without adding any detergent. Begin from the far end of the corner, and once more, go over the room.

This is crucial since it will enable you to rinse your carpet entirely by removing any dirt and soap trapped within the fibres. You should use strictly cold water to stop the entire detergent from forming.

11. Afterward

Once you finish cleaning, allow the carpet to dry for some hours before returning the furniture to their position.

If you have a humidifier or even a fan, you can set them up to run for about five hours or 24 hours for the carpet to dry entirely if possible.

Also, ensure that you empty and rinse the water tank of the cleaner and place them somewhere to dry up before placing them away.

Frequently Asked Questions

1. What does a carpet cleaner do?

A carpet cleaner features a design that forces a mixture of cleaning solution and warm water to the carpet to ensure deep cleaning.

By doing this, the dirt and solution are then removed from the entire carpet hence leaving the base of the carpet and fibre clean.

Carpet deep cleaner usually does not necessarily use steam like an actual steam cleaner.

2. Are carpet cleaners worth it?

Of course, yes. Usually, the average price of the carpet ranges from $200 to $260 nationally. However, sometimes it may vary as per the level of the size and the number of rooms you intend to clean.

You should not doubt that regular carpet cleaning is a crucial idea. Still, it is one of the recommendable ways of maintaining the appearance, longer-lasting, and healthier carpets.

3. What is a professional carpet cleaner?

Usually, a professional cleaner comes with only two broad advantages over homeowners when cleaning the carpets.

A pro knows well how to use it under special conditions like tough stains, water damage, and some fabrics that require sensitive care.

4. What is a good carpet cleaner?

The best carpet cleaner overall is Proheat 2X Lift-off Pet

5. How can I clean my carpet without a machine?

You can achieve cleaning your carpet by creating a solution of distilled vinegar with another three parts of cold water.

Once you have prepared the solution, you can spray onto the carpet fairly as you give it some minutes of contact. 

Next, you can take a microfiber piece of cloth and begin blotting gently. Never scrub because you might end up damaging your carpet.


Having gone through this article, hopefully, you have got a better understanding of how to use a carpet cleaner. Ensure to follow this guide carefully for you to enjoy the entire process.

However, it is good to allow your carpet to dry up for five good hours or even 24 hours.

Leave a Comment